UB> Reports> Consumption by Meter Size

Consumption by Meter Size Report

Summary

The consumption by Meter Size Report will display the consumption on a selected meter type (water, gas, electric) sorted by meter size. The size of a meter is set up on the device type attached to the meter and can be viewed on the Device Maintenance window (UB> Maintenance> Device> Meter tab> Device section> Size field). Electric meters do not have a meter size, so the consumption on electric meters will be grouped together on a single line item.

The Meter Status drop-down menu allows you to select the status of the meters you would like to include on the report. The report will only include devices that are installed on customer accounts or are on uncommitted service request. If a meter has an inventory status of Installed (UB> Maintenance> Device> Meter tab> Device section> Inventory Status field), but has not been installed on a customer account using a service request the meter will not display on the report.

The Consumption by Meter Size Report includes a consumption conversion so you can convert the consumption that displays on the report to the same unit. If you do not use a consumption conversion, the report will display the consumption on the meter as it was read. For example, if there is 100 acre feet of consumption on a meter, and 100 cubic feet of consumption on another meter on the report, both devices will display 100 units of consumption on the report. In order to use the consumption conversion feature, there must be a conversion formula set up on the conversion table (UB> Maintenance> Consumption Conversion) for each unit type set up on a device type. For example, if the meters are read in cubic feet and acre feet, you will need to create a consumption conversion formula to change both cubic feet and acre feet into gallons.

The status of the customer account (Active, Suspended, Final, Vacation, Delete) attached to the device will not affect the devices that display on the report. All active meters in the route selected to report on will display on the report.

Click here for information on the View Reports window.

Click here for information on Water meter device types.

Click here for information on gas meter device types.

Click here for information on electric meter device types.

Click here for information on device maintenance.

Click here for information on consumption conversion table maintenance.

Step by Step

1 Open the Consumption by Meter Size window (UB> Reports> Consumption by Meter Size).

2 Configure the report.

Select the meter routes you would like to include on the report in the Routes field.

Press CTRL+A to highlight all of the routes in the Routes field. Press SPACE to check or uncheck all of the selected toggles.
You can view the route attached to a device in UB> Maintenance> Device> Connections tab.

Select a conversion in the Convert To drop-down menu to convert the consumption that displays on the report to another unit type. If you do not select a conversion, the consumption will display on the report as it was read. For example, if there is 100 acre feet of consumption one meter and 100 cubic feet of consumption on another meter, both devices will display 100 units of consumption on the report. The Convert To drop-down menu allows you to convert the consumption on both meters to a single unit type such as acre feet or cubic feet.

The Convert To drop-down menu will display all Consumption Conversions created in UB> Maintenance> Consumption Conversions.
The consumption amount in the report is pulled from the Consumption field of the Meter History table and is multiplied by the conversion selected in the Convert To field.

Enter a Reading Period and Reading Year of the meter reading you would like to include in the report. This will filter the consumption that displays in the report by meter read period and year.

If a meter does not have a reading during the reading period and reading year it will still display on the report. This filter is used to filter the consumption that displays on the report, not the meters.
The Reading Period and Reading Year of a reading are entered when you import the meter reads (UB> Meter Management> Readings Import> Import Meter Information window> Read Period and Read Year fields). You can view the read period of a meter reading from the Device Maintenance window (UB> Maintenance> Device> Consumption tab> Period column).

Select the device types you would like to include in the report in the Device Type drop-down.

If you select Electric devices, all devices will be grouped together on the report since there is not meter size associated with electric meters.

Select a Meter Status from the drop-down menu to filter the report by the status of the meter connection.

Select All to include all meters on the report.

Meters attached to an uncommitted add device service request will have a Pending connection status until the service request is committed (UB> Service Requests> Commit). In order to include meters attached to uncommitted add device service requests you must select All in the Meter Status drop-down menu.

You can view the connection status of a device from the Device Maintenance window (UB> Maintenance> Device> Connections tab> Status column).
A meter will have an Active status when it is installed on a customer account.
The connection status will be set to removed when a remove device service request has been committed on the customer account.
The connection status will be inactive if the status was manually changed from the Device Maintenance window.

The report will display the following information: meter size, number of accounts, consumption and totals of the consumption and number of accounts columns.
- The number of accounts column is the total number of active meters attached to the route or routes that were selected in the Begin and End Route range fields. The meter does not have to have consumption during the read period and year to be included in the number of accounts column.
- The consumption column will display the consumption as it was read on the meter if a consumption conversion was not selected in the Convert To drop- down menu.
  - If a conversion was selected in the Convert To drop-down menu, the consumption on the device will be multiplied by the conversion amount set up on the conversion table (UB> Maintenance> Consumption conversion) based on the unit type attached to the device. For example, if the consumption was read in cubic feet and is changed to gallons, the consumption read on the meter (100) will be multiplied by the conversion amount (7.48000) and then the service rate will be applied to the modified consumption amount (748).

Springbrook Software

Toll Free Support 866-777-0069